Відео

THIS WAS THE WRONG WAY TO DO THIS I now have a destroyed Kindle Paperwhite BEWARE

do you have any recommendations on how to make the switch button work? all is well except that. maybe something i'll push in the motherboard?

A friend accidentally poured a sweet drink on my 12 year old 3rd gen. It continues to work but stops responding to touch. The buttons physically feel sticky when you move it. In fact, when I opened it up to clean it, the inside was covered in sweet ooze as well. Disassembly went fine, no problems, but in the process of disassembly, I should mention that my middle screen touch digitizer, bezel frame, broke. It was obviously very old, and no matter how much I tried to open it carefully, it still broke. How do you fix it, i.e. replace it? Is there a video, a manual on the WEB? It seems to use adhesive to attach it, and it looks simple, but I still want to learn how to do it sooner.

Can you please tell me how I can move the LCD cable from the chassis (to replace with a new one, I damaged one side of the LCD cable that goes to the logo board) It seems to be really hard to remove from the chassis.... So I have a new cable to replace it, however need help on how to remove the old cable from behind the LCD display)?

In my ipod hold and home button both working. But when I tried to start it nothing appears on my iPod. What to do? Appreciate for any help. Thanks.

thanks for wasting my time you a$$hole

100% works for my macbook 15 2013 🎉

Hi! I have the same Retina 15 2012 MacBook Pro, it has the same problem, I tried to replace the ISL62882C with ISL62882, but it didn't work. Is there a possibility, that 62882 without "C" is not compatible? I looked through the datasheets, they are basically the same :(

Hello, it is June 16, 2024... I followed all your instructions and repaired a macbook pro mid 2010, I have had it operational since yesterday, working without problems... excellent information, thank you very much, and just as a piece of information, with I have installed OpenCore legacy patcher Sonoma 14.5, it is wonderful to see a 2010 mac running with macos 2024.

Hi, how much would you charge me for the same 17 inch 2009 model?

The lead free solder melt at 218 C. The tricky part is getting the board to that temperature. For tiny board 250 C is enough. For mobile board, it is 350 C. For large gaming boards it is 420 - 450 C. Sometimes a preheater is needed for large chips like CPU with 25/75 heat split where the lower heater rises the board temperature to 168 C and the top heater and rises the heat to 220 C. These numbers will work with hot air stations with internal blower turbine of 120L/min like Quick 700w or 1000w. Weaker hot air stations like 350w stations would work but only for smaller boards. The point is, these are numbers. Get yourself an Atten or Quick and start experimenting.

Hi ,please tell me ,Will the display from a1286 fit on a macbook pro a1398?

My charger gets really hot and burns me at the touch and hardly ever charges. When it does charge it gets abnormally hot and can cause damage to the skin. When it does charge it shows either a very dim Orange light or a bright green light what could this be??? I’ve been through way too many chargers and cleaned the contacts and still no charge?

Why did you remove the audio part ?

Had my Kindle for years and years, and today the power button stopped working. I thought it had somehow bricked itself, but luckily not. It charged, it connected to my PC, the screen unlocked when I did so. Did a search, found this video, spent 20 minutes disassembling, cleaning, and the reassembling the device, and now it works. Here's to another 12 years!

tks! You saved me

I lost my screen with that glue just be careful.

Is it also if the smc chip broken that my computer don’t charge and don’t show battery and don’t turn on?

You´re a Genius Dude Thank You So Much

Anıl kaya nerver sid lg k9 mobile phone

The Home/Menu button of my Kindle Touch does not work. I can hear and feel the click, but it does nothing. Here’s what I did to reactivate my Home button. I surmised there was a buildup of crud in the switch mechanism that needed to be cleaned out. I chose 91% isopropyl alcohol because it was a high grade solvent that would mobilize the crud without leaving a residue or attacking the plastic. Don’t use plain rubbing alcohol because it has oils in the alcohol to facilitate “rubbing.” 1) Turn the unit off. 2) Take a napkin soaked in IPA and daub the raised portions, allowing a little to slip into the slots. 3) Before the IPA evaporates (and it will evaporate quickly!), work the button repeatedly. 4) Repeat as needed Each cleaning cycle, things got better and after three, operation was great - took 5 minutes for the whole thing!

What have you found out about MacBook pro A1286. Circuit board 820-2195-A with the same problem. It already has a J8 ez capacitor.

With what header

I replaced my logic board and exat same keys still don’t work

hey, whats the exactly name of the Chip u replaced first? Can i buy any chip with this name: CY8C24794?

Thanks for this excellent tutorial. Easy to follow, very logical procedures and visuals. Great job!

Nice Information

you are a genius!! Thank you so much!!!

Wy u use the diode mode and not the ohm mode for testing a short ?

He comment section there was a man looking a card slot in ipad hehehe😅😂😊

very helpful

Ok, so something happened that I see in this video. On the top, under the glue at the top is a green ribbon that connects points on the motherboard. Is that important? If it tears, will it prevent the surface from turning on?

Does anybody know if the later imac boards fit this. Are the mounts all the same?

The put a lot of glue under the battery to the point that you have to destry the battery to remove it... Such a dick move from Amazon :(

Crazy stuff. Wish I could do that.

Thank you!!!

Does it actually contain ink?

GREAT Vid!!!:) Thanks loads!

I can't hear no sound

Remarkable video. I learnt a lot about opening of a MS Surface. My Surface USB has become unresponsive. I need to open & see if it can be repaired.

How a thea. ipod

Total click bait bullshit. You’re a loser mate.

NEED HELP REPLACING THE POWER SOCKET… DIDNT SEE YOU TOUCH THAT PART

Hey very interesting, very well explained . Thx

Hi, I have the same problem with my 2009 Mac book 17" how can I send it to you to fix the problem. I enjoy your program keep up this good information.

Real quality... putting the SSD chip ON THE MAINBOARD. What is this, a CHROMEBOOK? Garbage. How much do you pay for an Apple only to find out it DOESNT HAVE A REMOVEABLE M.2/NVME SSD ?? Unexcuseable

How to get test drive like you thanks

How much pressure did you have to apply to get the click wheel out of the front case?

Use a little isopropyl alcohol around the battery compartment, 3-5' coffee break to soften the glue, then insert a credit card by the widest side. The battery comes out easily without damage.

can this display be connected to an arduino or raspberry pi?